Place of Origin:
GuangDong , Mainland China
Brand Name:
YW
Certification:
SGS
Model Number:
CRM 01
Contact Us
Small Household Electrical Appliances Plastic Injection Mold With Brass Plating Surface
Specification:
Name
|
Plastic Injection Moulding |
Plastic Material Type:
|
ABS, ABS+PC, PP, PS, POM, PVC, TPE, TPU, Acetal,PA6.6,PA6,PA6.6+30GF,etc. |
Mould Steel:
|
Saarstahl, Assab, AISI & JIS, DAIDOSTEEL, ALCOA, S136, 1.2311, 1.2738, NAK80, 2344, 420, 2083 |
Mold Base:
|
Hasco standard, DME standard, LKM standard,PUNCH, JINHONG, Other |
Cavity No.:
|
Single, Multi Cavity, Change Insert |
Surface treatment:
|
Zinc plating, nickel plating, chromium plating, brass plating, decromet, etc. |
Mould Texture
|
EDM,VDI 3400 Code,MOLD-TECH,Texturing |
Cavity ,CoreFinishing
|
High Polish, mirror face, Grade 3 Diamond, Paper Finish,Stone Finish, |
Type of Gate
|
Cold gate, Hot Runner Gate, Sprue Gate, Pin Point Gate, Submarine |
Type Of Ejection |
Ejector Pin, Ejector Blade, Stripper Plate, Ejector Sleeve Lifter, Pneumatic Ejector. |
Molding Making:
Material of steel cavity and core use imported S136 stainless steel with fine polishing, high hardness to
get mold's high precision and good quality.
About gate
pin- valve gate ,pneumatic drive the nozzle pin simultaneous high speed open and close action. which can
effectively control the injection hole open and close actions on each cavity. reliable seal function, smooth
moving, low thermal expansion rate ,long using life and also saves electric energy.
About hot runner
hot runner system is designed and made by ourselves, it can achieve ideal and prompt heating effect for
preform production ,cavity with lower injection pressure to reduce wear and tear of mould parts.
Heat system with double heating system,it has separate temperature control mode ,the heat bar are used
to heat the mould mainfold plate,small heaters supply the heating temperature for cavity nozzle
continuously.
Cooling system
each parts including core ,cavity and valve gate has independently cooling system.
Production Process:
Sample/drawing |
|
|
Steel, cavities, price, delivery time, payment terms, shipment. |
|
After all confirmed-place order and usually need 50% deposit |
|
We supply part and mould structure design |
|
CNC,EDM, and so on |
|
Testing mould to make sure everything is ok. |
|
We send samples for customers checking |
|
After all confirmation,the customer send the balance to us before shipment |
Delivery |
|
System Highlights:
Reduces material wastage compared to conventional runner system molding
Allows for more cost-effective fully automatic molding
Complete control of material flow, allowing for molding of different parts in the same mold
SGS Certification:
Advantages:
We should save you money through intelligent tooling design and efficient production runs. We have advanced CMM Machine, CNC Machine, EDM Machine, Wire-Cutting and other normal machine, the injection machine from 20 ton to 1000 Ton. We can injection almost any kind of plastics such as ABS, PC, PBT, ABS-PC, PP, PMMA, PE, nylon, etc. The steel we use for manufacturing moulds are P-20, H-13(fully hardened mould with HRC 52-54, 420 SS (Stainless Steel),ETC or as specified by the customers.
Dongguan Universe Plastic:
Each mould is made in our Factory. It is a mould exported to Europe | America , with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge
Send your inquiry directly to us